Products Description
1. Basic information
Definition: Titanium iron is an alloy of titanium (Ti) and iron (Fe), typically containing 30-75% titanium, with the remainder being iron and a small amount of impurities (Al, Si, C, etc.).
Form: Silver gray block or particle (1-50mm), density about 6.0 g/cm ³, melting point 1400-1500 ℃.
Key characteristics: high melting point, strong chemical activity (easy to react with O/N/C), low density (lighter than molten steel, requiring special addition process).
USE
(1) Deoxygenation and Purification
Deep deoxidation: Titanium has a stronger affinity for oxygen than iron (generating TiO ₂), reducing oxide inclusions in steel.
Fixed nitrogen/carbon: forms high melting point TiN (melting point 2950 ℃) and TiC (melting point 3140 ℃) to suppress grain boundary embrittlement.
(2) Grain refinement and control
TiN pinning effect:
Inhibit austenite grain growth at high temperatures (especially for welding steel to prevent coarsening of the heat affected zone).
TiC precipitation strengthening:
Enhance strength in microalloyed steel (such as high-strength low-alloy steel HSLA).
(3) Improve mechanical properties
Enhance toughness: Refine grain size to improve low-temperature impact toughness (key below -40 ℃).
Corrosion resistance enhancement: Titanium stabilized oxide film (Cr Ti composite oxide layer), used for stainless steel (such as 409/439 heat-resistant steel).
(4) Prevent intergranular corrosion
Fixed carbon: TiC is preferentially formed in austenitic stainless steel to prevent Cr ₂ ∝ C ₆ precipitation (avoiding corrosion caused by chromium depletion).
Specification
|
Ferro Titanium index |
|||||||
|
model |
Chemical composition(%) |
||||||
|
Ti |
Al |
Si |
P |
S |
C |
Mn |
|
|
≤ |
|||||||
|
FeTi30-A |
25.0-35.0 |
8.0 |
4.5 |
0.05 |
0.04 |
0.15 |
2.5 |
|
FeTi30-B |
25.0-35.0 |
8.5 |
5.0 |
0.06 |
0.05 |
0.15 |
2.5 |
|
FeTi40-A |
35.0-40.0 |
9.0 |
3.0 |
0.04 |
0.04 |
0.15 |
2.5 |
|
FeTi40-A |
35.0-40.0 |
9.5 |
4.5 |
0.05 |
0.04 |
0.15 |
2.5 |
|
FeTi40-C |
35.0-40.0 |
5.0 |
1.5 |
0.04 |
0.03 |
0.10 |
0.5 |
|
FeTi40-D |
35.0-40.0 |
3.0 |
0.5 |
0.04 |
0.03 |
0.10 |
0.5 |
|
FeTi70-A |
65.0-75.0 |
3.0 |
0.5 |
0.03 |
0.03 |
0.10 |
0.5 |
|
FeTi70-B |
65.0-75.0 |
4.0 |
1.5 |
0.04 |
0.04 |
0.15 |
0.5 |
|
FeTi70-C |
65.0-75.0 |
5.0 |
3.0 |
0.04 |
0.04 |
0.20 |
0.5 |
Hot Tags: ferro titanium, China ferro titanium manufacturers, suppliers, factory, dual shield flux core welding wire, Si Al Ca Ba Alloy, Calcium Silicon Alloy, flux wire welding for beginners, blue demon stainless flux core wire, manganese ferro
